| |
|
| |
|
|
TopGear L-series is available
in six different sizes. Shaft
seal options include mechanical
seals, packed gland and double
flushed PTFE lipseals. Flange-mounted
or bracket for foot-mounting,
the TG L pedestal fits to IEC-flanged
motors. Safety relief valves
are available built-on or separately.
Connection sizes from 1"
to 1.1/2".
|
|
|
| Features |
| •
|
Compact flange
mounting - Secure correct
alignment between pump and
drive unit |
| • |
Small clearances
- Good self-priming capability
and high volumetric efficiency |
| • |
Vertical
and large ports - Improved
priming ability.
Low NPSHreq reduces risk
of cavitation |
| • |
Large gear
bearing diameter - Improved
discharge pressure capability.
Prolonged service life |
| • |
Relief channel
from seal area to suction
side - Improved mechanical
seal life. Reduced leakage
from packed glands |
| • |
Spring loaded
gland packing - Less maintenance
required |
| • |
Hardened
(heat treated) interior
parts - Prolonged service
life |
|
| |
|
| Applications |
| For handling
oils, viscous liquids in
paint industry printing
inks, resins varnishes and
adhesives |
|
| |
|
| Technical
Data |
| Casing |
Nodular cast iron One
size in stainless steel |
| Idler
and rotor |
Steel |
| Max.
capacity |
8 m3/h |
| Max.
differential pressure |
30 bar |
| Max.
temperature: |
250°C |
| Max.
viscosity: |
80,000 mPas |
|
| |
