Fabricated Y Type Strainer
Y Shape Fabricated Strainer and Filter Design Standard – ASME Sec. VIII
End Connection – Flanged End / Butt Weld End
Pressure Rating – 150# / 300# / PN10 / PN16 / PN25 / PN 40 / PN64
Bolted Cover Fabricated Y Type Strainer Flanged End, Rating – Class 150, Model Series: FYFS31
Bolted Cover Fabricated Y Type Strainer, Flanged End, Rating – Class 300, Model Series: FYFS32
Fabricated Y Strainer (Quick Open/Bolted Cover/Davit Arm)Manufacturing Size Range: DN50/50mm/2”/Two Inch, DN65/65mm/2-1/2”/Two and Half Inch, DN80/80mm/3”/Three Inch, DN100/100mm/4”/Four Inch, DN125/125mm/5”/Five Inch, DN150/150mm/6”/Six Inch, DN200/200mm/8”/Eight Inch, DN250/250mm/10”/Ten Inch, DN300/300mm/12”/Twelve Inch, DN350/350mm/14”/Fourteen Inch, DN400/400mm/16”/Sixteen Inch, DN 450/450mm18”/Eighteen Inch, DN500/500mm/20”/Twenty Inch, DN550/550mm/22”/Twenty Two Inch, DN600/600mm/24”/Twenty Four Inch Size and big more large size of fabricated y type strainer can manufacture and supply on order basis.
A Strainer is basically mechanical product which has a provision to remove hard particle of pipe line subject to selection of perforated punched hole sheet or wire mesh degree of filtration, pipe line process media can be in form of liquid or gas. Y Type strainer is a one types of filter – strainer which uses to remove a foreign particle of industrial process line.
Fabricated Body of Y strainer is normally of carbon steel or stainless steel pipes or plates in various material grades with flanged end and butt weld end connection. Fabricated Y strainers is specialy for high filtration area and less presssure drop.
Nivz bolted cover fabricated Y Type strainer has low pressure drop due to higher flow area through screen. Fabricated body Y Strainer used for the removal of foreign bodies in pipe line and use line trouble free service and freedom costly repairs or replacement for large area straining perforated screen lined with wire mesh can be used.
Advantages of use Y Strainer is to save and increase a life of Pump, Pressure Equipment, Mechanical Seals, Expensive Control Valves, Pressure Reducing Valve, Flow Meter and gives foreign particle less final product. An advantage to Y strainer is, it can be mount in either vertical or horizontal but in both case cover portion must be on down side to collect foreign particle and easy to clean at time of cover opening.
Nivz each Bolted Cover design Y Strainer have provision of blow down plug at cover which allow to clean cylindrical screen element without removing from body and without disturbing a process.
Selection of wire mesh size is very important for a life of Y Strainer element and process equipment. Over fine mesh results frequent clogging, overload on wire mesh element, reduce life of element and pressure drop increase of pipe line. In case of course selection it damage costly equipment and meaningless to install strainer.
Nivz Valves & Automation is Fabricated Y Type Strainer Flanged End Manufacturer – Exporter, Supplier, Stockist, SS304L, 316L Super Duplex Steel, Alloy 20 Material Fabricated Body Y Type Strainer, Lower Pressure Drop Fabricated High Performance Fabricated Y Type Strainer, Bolted Cover and Drain Vent Arrangement Provision, Quick Open Type Strainer Manufacturers.
